Do NOT use "auto-fill" to fill in the registration form!! 90% of the time, "auto-fill" does not provide the correct information in the registration fields. Due to the large number of spammers we get (who always use auto-fill on forms), we must approve all new registrations before you can post. If your registration form is not filled in correctly we will assume you are a bot and you will not be approved. Note that some information is required and some is optional.
NOTICE: Please don't be a LURKER! British Car Forum can only survive if its members (YOU) participate! Jump in and join the fun!
I took a razor knife and cut the flex hose close to fitting then removed the fitting with a 9/16 deep socket
Said the male insect to the female...
Before dinner, maybe, couple hours after dinner, no way....
Looks like and expensive design to fabricate. With my present front tilt setup the L Bracket can pivot and rock forward when the bonnet is opened. When
Pull the plugs and place your thumb over no1 cylinder and turn the motor over...you will know that you are on the compression stroke...unless you want
Hello everyone! I'm stumped?? I need help with my 78 MGB I have the following: [FONT=Verdana]WEBER 2bbl. carb. (I Have a 40,000 volt Flamethrower...
Hi All, When, on my Healey 100 BN1, (with a BN2 gearbox with OD), I switch the OD on, both the slow blow 50A AND 35A fuses blow. Any ideas why? Cheers Wally Simpson
Section Widget
Categories Widget (top-down)
Recent Articles
Recent Blog Posts
Twitter
Re: Removing Left Rear brake line... help!
I took a razor knife and cut the flex hose close to fitting then removed the fitting with a 9/16 deep socket
sunbeam25 Today, 01:24 PM