• TR7/8 Door stuck shut.

    I've worked on a lot of British cars over the last 40 years but the frustration of a door that won't open past the safety latch had me scratching my head. The problem was the door would latch and lock but when releasing it would only release to the first catch. The interior door latch assembly seemed to be moving the pin that is supposed to release the outer door latch. I took off the working passenger side door outer latch to see what I could find. The outer latch is bolted to the inner latch through the back side of the door with the screws on the back side of the door. The only thing that protrudes through from the outer latch is a small pin. This can be moved with a long probe by going down through the window opening at the top of the door. The inner latch appeared to be operating this pin appropriately. I made sure by operating it manually with a long probe. The problem was isolated to the outer latch not releasing completely. What to do? I tried the brute force shoulder method. I'm not as young as I once was!! No luck. The solution to getting the door open was a big heavy computhane hammer to the inner upper part of the door just above where the lock assembly is. Use a fender cover to protect the door panel and be sure to hit where there is metal behind the door panel. The door popped open after a couple heavy blows. Examining the outer latch assembly revealed a small piece of plastic that had broken away and jammed the mechanism.

    If this had not worked I think I was going to have to remove the seat and door panel then take out the rear window channel and destroy the inner latch assembly in order to grind off the captive nuts holding the outer door latch. WHEW!
  • Recent Articles

  • Recent Forum Posts

    Bugeyze

    Re: Universal joints

    Thanks for input, I will mount them toward the shaft.

    Stan, I'm not sure what you mean, but make sure it is under compression when the drive

    Bugeyze Today, 05:25 AM Go to last post
    Blue964

    Trying to contact Pete Delaney 5 speed.

    I'm in the process of trying to put together a package - for myself! - of a five speed gearbox conversion for my Mk2 3000. I can get the gearbox and someone

    Blue964 Today, 04:55 AM Go to last post
    Basil

    New Rolls

    I bought a vintage Rolls Royce, but the budget didn't cover a driver.


    So I spent all that money,
    and I've got nothing to

    Basil Today, 03:16 AM Go to last post
    Fanigbo

    Re: BJ8 Dipstick Broke

    Thank you all for your very helpful responses. Iíll put the car up on a lift as soon as I receive my new sump gasket and remove the sump. It looks like

    Fanigbo Yesterday, 11:52 PM Go to last post
    Jim_Gruber

    Re: Richmond VA 1960 Bugeye Bringing Miss Eva back to life.

    You do realize having that other toy in the garage will delay you in getting the Bugeye done. Looking good, waiting to hear vroom, vroom noises soon.

    Jim_Gruber Yesterday, 11:04 PM Go to last post
  • Recent Blog Posts

    gfreeman

    stromberg zenith carb dash pot

    Hello to all. The dash pot oil on one of my carbs on my TR 6 keeps disappearing. Any clues on why and where it goes? What is the fix?

    gfreeman 08-07-2019 10:13 AM
  • Twitter