• TR7/8 Door stuck shut.

    I've worked on a lot of British cars over the last 40 years but the frustration of a door that won't open past the safety latch had me scratching my head. The problem was the door would latch and lock but when releasing it would only release to the first catch. The interior door latch assembly seemed to be moving the pin that is supposed to release the outer door latch. I took off the working passenger side door outer latch to see what I could find. The outer latch is bolted to the inner latch through the back side of the door with the screws on the back side of the door. The only thing that protrudes through from the outer latch is a small pin. This can be moved with a long probe by going down through the window opening at the top of the door. The inner latch appeared to be operating this pin appropriately. I made sure by operating it manually with a long probe. The problem was isolated to the outer latch not releasing completely. What to do? I tried the brute force shoulder method. I'm not as young as I once was!! No luck. The solution to getting the door open was a big heavy computhane hammer to the inner upper part of the door just above where the lock assembly is. Use a fender cover to protect the door panel and be sure to hit where there is metal behind the door panel. The door popped open after a couple heavy blows. Examining the outer latch assembly revealed a small piece of plastic that had broken away and jammed the mechanism.

    If this had not worked I think I was going to have to remove the seat and door panel then take out the rear window channel and destroy the inner latch assembly in order to grind off the captive nuts holding the outer door latch. WHEW!
  • Recent Articles

  • Recent Forum Posts

    TOC

    Re: up or down?

    no. I mean, like Larry said...you will damage all sorts of stuff trying to drop the engine low enough in the back.
    Then the tunnel isn't wide enough

    TOC Today, 04:00 PM Go to last post
    Basil

    Re: Antique Car Lover

    Welcome aboard Robert. It looks like you may have cut and pasted your text from some other program which added a lot of "formatting" which

    Basil Today, 03:59 PM Go to last post
    ROBERT WROTEN

    Antique Car Lover

    <span style="font-family: century gothic"><strong>Glad to be a member</strong></span>

    ROBERT WROTEN Today, 03:49 PM Go to last post
    LarryK

    Re: up or down?

    If you can reach the upper bolts and the bell housing will move back far enough to clear firewall. If not careful will crush rear oil lines on back of

    LarryK Today, 03:06 PM Go to last post
    Basil

    Re: Cant get rif of this stupid annoying sign over page.

    The little sign is there to encourage people to participate - and to start that participation by simply posting an introduction of themselves.

    Basil Today, 02:50 PM Go to last post
  • Recent Blog Posts

    garystrumphet

    Garystrumpet

    My car has had its rear lever action shocks replaced with a Wheewlright tube shock conversion. The shocks are stamped made in england 010672. What shocks replace the ones I have? Where to find them?

    garystrumphet 06-09-2019 04:40 PM
  • Twitter