• TR7/8 Door stuck shut.

    I've worked on a lot of British cars over the last 40 years but the frustration of a door that won't open past the safety latch had me scratching my head. The problem was the door would latch and lock but when releasing it would only release to the first catch. The interior door latch assembly seemed to be moving the pin that is supposed to release the outer door latch. I took off the working passenger side door outer latch to see what I could find. The outer latch is bolted to the inner latch through the back side of the door with the screws on the back side of the door. The only thing that protrudes through from the outer latch is a small pin. This can be moved with a long probe by going down through the window opening at the top of the door. The inner latch appeared to be operating this pin appropriately. I made sure by operating it manually with a long probe. The problem was isolated to the outer latch not releasing completely. What to do? I tried the brute force shoulder method. I'm not as young as I once was!! No luck. The solution to getting the door open was a big heavy computhane hammer to the inner upper part of the door just above where the lock assembly is. Use a fender cover to protect the door panel and be sure to hit where there is metal behind the door panel. The door popped open after a couple heavy blows. Examining the outer latch assembly revealed a small piece of plastic that had broken away and jammed the mechanism.

    If this had not worked I think I was going to have to remove the seat and door panel then take out the rear window channel and destroy the inner latch assembly in order to grind off the captive nuts holding the outer door latch. WHEW!
  • Recent Articles

  • Recent Forum Posts

    sparkydave

    Re: water pump installation

    I think that would be a nay on that. I made the oops of putting the radiator back in after replacing my water pump, and realized I had left the fan blade

    sparkydave Today, 04:49 PM Go to last post
    Cutrog1

    Re: Healey BJ8 failed MOT in 1979 - Almost restored Aug 2019!

    Thanks .... I guess it was my ego that hoped for followers...I look forward to observers comments

    Cutrog1 Today, 04:10 PM Go to last post
    John Turney

    Re: Honda spark plugs

    I would look for a used Accord before I would look for a Chevy Volt. My wife insists that her 2009 will be her last car.

    John Turney Today, 03:57 PM Go to last post
    Drone Dog

    Re: PCV and oil leaks

    steve
    i got rubber stoppers from Lowes. they were in one of the drawers in the bolt aisle.

    Drone Dog Today, 03:57 PM Go to last post
    sp53

    Re: Reproduction TR3A Grille

    That sounds about right. Mine is in there around the 185 somewhere. Sounds like your thermostat was too hot all a long—Good News!—need some of that.

    sp53 Today, 03:57 PM Go to last post
  • Recent Blog Posts

    gfreeman

    stromberg zenith carb dash pot

    Hello to all. The dash pot oil on one of my carbs on my TR 6 keeps disappearing. Any clues on why and where it goes? What is the fix?

    gfreeman 08-07-2019 10:13 AM
  • Twitter