View RSS Feed

GTP1960

  1. Fretted crank hub fix.

    I had installed the Moss narrow belt conversion with a dampener pulley a couple of years ago.
    it seemed to perform well & I was happy with the results.....right up until the pulley failed.
    turns out the woodruff key was only partially covered by the pulley boss. But you could not see that from the front, because the spacer blocks your view.
    Click image for larger version. 

Name:	IMG_1095.jpg 
Views:	114 
Size:	55.3 KB 
ID:	49214
    the key gradually rockered back and finally broke off, allowing the pulley to spin on the hub, wallowing ...
  2. Cold ram air intake (poor mans version)

    After noticing a power drop-off after the car had been running awhile & watching the temp. gauge gradually creep up. I looked into a cold air intake system for my TR3A. But could find nothing that was customized & had an enclosed duel carb. airbox.

    So I did the next best thing:

    I made a simple & inexpensive air intake modification.
    Bought a generic brake line cooling scoop (6"x 3.5") with a centered 3" port , a Spectre 3" x 28" ...

    Updated 10-04-2016 at 07:02 AM by GTP1960

    Categories
    2015 1960 TR3A project
  3. Claying your car, before you polish

    I only thought my car was clean.

    I have never used clay before. Really didn't even know it was out there until a friend told me about it recently. The whole concept around clay is to use the tacky clay to strip your car's top coat of contaminates, ground in debris, etc., most of which you can't even see. But if you were to gently rub your hand on the surface you would probably feel.

    There are several makers of clay for finishing your car.
    the ones I looked at ...
  4. Meguiar's G3626 Ultimate Wash & Wax Anywhere Spray - 26 oz.

    I am writing about this stuff because I am pretty impressed.

    Click image for larger version. 

Name:	Mcguiar waterless wash.jpg 
Views:	298 
Size:	38.1 KB 
ID:	44842
    I tried it as a "detail wipe down" at a recent car show.
    I had driven perhaps 50 miles to get to the park & had a lot of bug splats to show for it.
    I had ordered
    "Meguiar's G3626 Ultimate Wash & Wax Anywhere Spray - 26 oz." from Amazon for about $10.00 and put it in the boot; promptly forgetting about it.

    When I pulled my chair out......there ...
    Categories
    Uncategorized
  5. TR3A convertible top install

    I'm going to try and give a detailed account, here:

    I had been postponing this job for over a year.
    Primarily because there was no complete professional instructions I could find, in one place.

    This top is a Robbins everflex sold by TRF. It was a previous return item so I got it for about $200.00 over a year ago.

    Installation is really a pretty simple job & I had installed a tonneau of the same material a while back.
    I guess a lot of the ...

    Updated 09-20-2016 at 01:14 AM by GTP1960

    Categories
    2015 1960 TR3A project
Page 1 of 13 1234511 ... LastLast