PDA

View Full Version : TR4/4A Gearbox rear seal removal again.......



karls59tr
12-07-2014, 12:52 PM
Once the Nut has been removed does the flange yoke just need to be tapped off the shaft with a rubber mallet to access the seal or is some type of puller required to pull the flange off?

TR3driver
12-07-2014, 06:15 PM
Mine have always come off with some encouragement from a brass hammer. But if yours is stuck, a harmonic dampener puller or 3-jaw gear puller should pop it right off.

karls59tr
12-07-2014, 07:00 PM
Mine have always come off with some encouragement from a brass hammer. But if yours is stuck, a harmonic dampener puller or 3-jaw gear puller should pop it right off.

Thanks Randall:encouragement: