View Full Version : For Sale Many TR3 parts

08-06-2013, 11:43 AM
Have three parts cars I will be parting out. Items of interest would be a solid rolling frame that has been powder coated. It currently has an engine that has been rebuilt; however, the head (which I obtained years ago) has been shaved the maximum and will require a thick head gasket to make it workable. Also, have several transmissions (one with overdrive) that probably need to be rebuilt. Many, many other parts; more than enough for three cars, I'm sure. Send me your needs and I'll let you know if its available.

Marvin Gruber
08-06-2013, 04:57 PM
PM me your address and phone number please. I am headed to Fort Walton tomorrow, if my wife will let me , I will come over and see what you have.

Marvin Gruber

08-07-2013, 09:40 AM
Hope this catches you in time. Call me at 850-582-7776.

Bob Owens

PM me your address and phone number please. I am headed to Fort Walton tomorrow, if my wife will let me , I will come over and see what you have.

Marvin Gruber

08-18-2013, 01:02 PM
BobbyO, I'm looking for a ratty old TR3 soft top to cut up and make into a bikini top. I'd need the front tenax but no windows nor back section. Please let me know if you have one like that. Thanks!

08-20-2013, 09:04 AM
Bobby O,
I may need a frame. Usable, just the frame, no engine or gear.
Any left?

08-26-2013, 11:49 PM
Looking for a pair of TR3 axles complete with hubs that are rebuild-able with standard wheel studs (not wire studs). Perhaps a complete rear end (non wire wheel, 1957 6 bolt bearing housing / round flange hub) if the price is right. Also interested in a master cylinder (separate brake and clutch) mounting bracket that sits atop the break / clutch pedal assembly. A decent trunk lid especially with an AMCO style luggage rack (TR3, no handle) and a semi presentable front bumper (fat chance... LOL).

Drop me a line ... bjnelson (the symbol humans know) theepicenter (the other symbol we know) com

09-27-2013, 10:44 PM
Looking for front fenders, inner and outer , they don't have to be perfect. Shoot me a PM

10-10-2013, 09:19 PM
I am in Indian Rocks Beach and restoring a '62 TR3B and looking for a bunch of stuff if you still have a lot please let me know.

10-17-2013, 10:48 AM
Bob - I'm looking for a working Speedometer for a 3A - Peter (631) 902-2114

Marvin Gruber
10-18-2013, 05:14 PM
Peter, pm sent about speedo.


11-22-2013, 06:52 PM
I need a tach for my TR3A. Any luck?

Paul S
12-27-2013, 08:43 AM
Looking for a pair of front seats.

01-06-2014, 03:25 PM
Is the OD trans still available?

02-01-2014, 01:42 AM
Hi Bob,

I finally got into the garage to look at my current guages on my TR3A.

I`m looking for the "Temp, Amp & Oil Pressure" guages. What do you have?

Thanx, Russ

03-30-2014, 12:29 AM
I need a full set of the brackets on the doors that the side curtains clip into. jsmeyr@comcast.net

04-30-2014, 08:15 AM
Looking for banjo bolt connectors for Lockheed TR3 brake system on my 56 (part numbers 59291 and 59293). Any chance you have any? Cheers, Mike

07-06-2014, 07:27 PM
Hello, I realize this is an old thread but by any chance do you have any more of the TR3 parts? Looking for many parts including seats, windshield, various sections of sheet metal.

07-11-2014, 03:51 PM
I'm looking for 1 domed glass for one of the small gauges.

02-05-2015, 12:32 AM
Hi there... would you happen to have two front brake calipers for a 1961 TR3A? I need the 'split-type', not the cross-over pipe type.
Barry Hogrefe

03-09-2015, 11:50 PM
I am looking for a pair of front brake calipers, later TR3 'split-type'. If you have these please call me on 425-214-2324.
Thank you,
Barry Hogrefe

03-11-2015, 01:07 PM
Looking for a good set or ok set of wire wheel knockoffs.

01-26-2016, 11:48 AM
I am looking for a tr3 pull vent with cable