PDA

View Full Version : TR2/3/3A TR3 Windshield Stanchion Short Screws Long Screws



luke44
08-04-2012, 05:06 PM
Screws holding stanchions to windshield frame - Moss part number
52 in diagram in link below

323-085 - Short Screw 7/8" - 4 required
323-035 - Long screw 1" - 2 required

https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29161&SortOrder=3#t op

I know if they go in the wrong spot you crack the windshield, but which goes where? From the top of the windshield going down, it it shot, short, long (long at bottom)? Or....

Thanks in advance,

TR3driver
08-04-2012, 05:14 PM
Long at the bottom, where the stanchion is thicker. Don't forget the tenon plates have to be in there.

luke44
08-04-2012, 06:41 PM
Perfect, thx Randall.