PDA

View Full Version : TR4/4A Rally lights/badge bar for TR4 source



panther49
05-12-2012, 09:08 AM
Does anybody knows of a source for rally type light bar to be used WITHOUT bumpers?

panther49
05-12-2012, 09:27 AM
This is what I'm talking about https://i787.photobucket.com/albums/yy153/camshaft1/rallylightbar.jpg

justin_mercier
05-12-2012, 09:51 AM
I believe Racetorations in the UK makes one for the TR4, I know they make one for the TR6, but they're a bit expensive + shipping over the pond

TR4nut
05-12-2012, 08:14 PM
Revington does that bar as well I think.

panther49
05-14-2012, 10:19 PM
Thanks to both members for your suggestions. They are available, why so expensive is beyond me.

Got_All_4
05-14-2012, 11:49 PM
I made mine by using a polished aluminum bar and running it through turned upside down badge bar holders. I then bolted to it a piece of flat stock the same width of the badge holders and that bolts to the licence plate holes. Depending on how long you want the bar the end braces have a twist to them and go behind the front bumper then bolt to the bumper brackets or over rider mount. Now mine is a TR250 and the over riders are farther apart than a early TR4. I tried to find a pic because I know I sent it to someone but could not find it. I'll keep looking though. Mine hold a couple badges and 2 driving lights.

Got_All_4
05-15-2012, 12:00 AM
Here is the discussion with pics

https://www.britishcarforum.com/bcforum/ubbthreads.php/topics/593322/1

Got_All_4
05-15-2012, 07:21 PM
The front licence plate covers the braces too. I did have to put a slight bend in the bar so it would follow the curve of the bumper. It is very strong and there is very minimal light shaking while driving. Only large pot holes do I notice any shaking and we have a lot of them in Ohio. So if your just butting on badges no worries.