PDA

View Full Version : Wedge TR7 pacesetter header connection to stock exhaust



johnrip
08-02-2011, 10:02 PM
I have an new pacesetter header for tr7 (i see on their website that they discontinued the model). It is new, but only the header...no other parts. I see in victorisa catalog that it came with a reducer...wondering what it loked like, and can you connect it to the stcok system using the "doughtnut" that was used to connect to the old cat converter? Make sense of this? Thanks

tr8todd
08-03-2011, 07:51 AM
The best way to do it is to weld on bolt together style collectors with a doughnut. Short of that, you can use clamp on connectors if you can get everything to line up. Install the header and then figure out what you need to get the job done. Speculating about what you may need before it's in place is just wasted effort. You need to see where everything lines up first.

johnrip
08-06-2011, 12:14 PM
I fixed the leak with a new gasket and longer bolts. Simple! Thanks for advice.