PDA

View Full Version : TR2/3/3A TR3 Bonnet information needed



mallard
06-03-2011, 01:22 PM
I just got a quote form the chrome platers. $1800.00 for over 80 parts not including the bumpers and over riders. I need to come up with some cash so I need to sell off a few things. I need some information on this bonnet so I can market it correctly. It is the type of bonnet that has the sheared off rear edge, two vent holes, non raised plinth, and no rivets. Rivets were deleted at TS22530 Oct 1957. Any ideas what time frame this would be correct for?

Geo Hahn
06-03-2011, 02:25 PM
...It is the type of bonnet that has the sheared off rear edge, two vent holes, non raised plinth...

FWIW, TS47905 has no plinths but the rear edge has a lip that I do not see in your photo.

mallard
06-03-2011, 02:50 PM
I've seen three style rear edges, sheared,90 degree fold , and what you mention.

Geo Hahn
06-03-2011, 07:08 PM
Just for clarification, the 'lip' I mentioned is probably what you are calling the 90 degree fold.

mallard
06-03-2011, 07:36 PM
The front and rear of the bonnet would be the same with the lip style edge. This is a shot of the front edge. Thanks Geo