PDA

View Full Version : I need a radiator!



Tabcon
04-13-2010, 08:06 PM
I've looked at tons of them and just ran across one made in
GB by a company named "Serck". I've never heard of them but their radiators look very nice and very well made.

Serck (https://www.serckservicesmotorsport.co.uk/index.php)

https://www.serckservicesmotorsport.co.uk/images/www.serckservicesmotorsport.co.uk/big/bg3411219786915IMG_0073.JPG

The price is not too bad considering some of the prices I've seen.

booley
04-13-2010, 10:35 PM
they are very nice, but shipping across the pond might be painful. Wizard has them for the TR4 at $450. Or here's another idea:
https://www.tonydrews.com/RadiatorPage.htm

bgbassplyr
04-13-2010, 10:37 PM
Tab, I looked at their site. Nice rads. Also looked at their tool section. Chicago Pneumatic disk cutter-38.27 pounds. Same tool at Harbor Freight-$9.95 on sale.
ISTR a company in Asheville, NC that sells nice al rads for less. I'll try to find it for you.

Try these. Can't find th one I mentioned.

https://www.rondavisradiators.com/new_products.htm

tdskip
04-13-2010, 11:04 PM
Getting the stock one re-cored with an additional row not an option Tab?

Good to see you back at the car.

newmexTR3
04-13-2010, 11:06 PM
These guys are good too:
https://www.wizardcooling.com/

booley
04-14-2010, 07:46 AM
These guys are good too:
https://www.wizardcooling.com/
on ebay:
https://cgi.ebay.com/ebaymotors/TR4A-ALUM...emZ200337724688 (https://cgi.ebay.com/ebaymotors/TR4A-ALUMINUM-RADIATOR-Triumph-1965-1968_W0QQcmdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ 3dUCIQ26otnQ3d3Q26poQ3dLVIQ26psQ3d63Q26clkidQ3d920 6926530989142068QQ_trksidZp3286Q2em7QQcategoryZ342 01QQihZ010QQitemZ200337724688)

Art Lipp used to sell them also, but I'm not sure if he still does...

Hatman
04-14-2010, 09:19 AM
Also looked at their tool section. Chicago Pneumatic disk cutter-38.27 pounds. Same tool at Harbor Freight-$9.95 on sale.

Just as an aside, the Harbor Freight version is <span style="font-style: italic"><span style="font-weight: bold">Central</span></span> Pneumatic brand, not <span style="font-style: italic"><span style="font-weight: bold">Chicago</span></span> Pneumatic. The later is a century-old, high-quality brand, the former is Harbor Freight's Chinese-made "house brand", undoubtedly named to do exactly what happened here -- create confusion and mistaken identity.

With that said, my guess is most of the Chicago Pneumatic tools are also made in China. And, in the interest of full disclosure, I also own several of the Harbor Freight cut-off tools. I wait until they go on sale for $5.99 and buy several and toss them out when the bearings seize or the seals blow out. <<GRAEMLIN_URL>>/grin.gif

Tabcon
04-14-2010, 10:52 AM
I've looked at the Wizard's and may still go with one of these.
I sold my old radiator on ebay, so to late there.

The quote I received from Ron Davis was about $650 and if you wanted the fan installed it was $850. I'm sure he makes a nice radiator, but a little too expensive for me.

Speedwell also makes a good one I've considered for around $500, but what really attracts me to the Serck are it's looks. It sort of retains the original look which I liked.

bgbassplyr
04-14-2010, 09:19 PM
Well, I'm wrong again, but other than the name difference, the two tools look exactly alike to me. So is Central copying Chicago or are both coming out of the same factory?

And like you, I buy them several at a time. At that price, no point in even looking to see what the problem might be.