PDA

View Full Version : Head Question



HarryL
02-15-2010, 02:17 PM
Getting ready to ship the head over to the machine shop
and will need to purchase springs and valves. This is for a 4A. Head will be flowed. My question; where's the best source
for these items. The usual suspects ?
Thanks in advance,
Harry

GreenOne
02-15-2010, 06:48 PM
I found British Parts Northwest to be very competitive on valves and springs when I did mine last year.

TR4nut
02-15-2010, 07:14 PM
Same here- BP Northwest also stocks good components and is easy to deal with.

mallard
02-15-2010, 07:23 PM
I also like to go with BPNW, Greg or Layton can answer just about any question you may have. If you are building a race engine they may not have what you need.

Brosky
02-15-2010, 08:34 PM
Keith,

That have a lot more than you might think. Greg was into racing triumphs in England for quite a while and is very knowledgeable and has access to a lot of options.

HarryL
02-16-2010, 07:33 AM
Thanks guys; will give them a call.
Harry

mallard
02-16-2010, 08:26 PM
My mistake, they are great to work with. Never a problem with them.