PDA

View Full Version : TR6 Early vs Late TR6 Interior Panel Differences?



BobbyD
12-26-2009, 08:47 PM
The obvious difference with interior panels over the years is the cosmetic design and the door pull, or lack off. Other then that, are all the hole locations the same i.e. window & door handle, mounting clips and general outline shape and dimensions? Same question for all the other interior panels?

Thanks......

tdskip
12-26-2009, 10:38 PM
Interesting question Bob. I can compare a 1971 to 1974 tomorrow if that helps.

BobbyD
12-27-2009, 08:51 AM
Interesting question Bob. I can compare a 1971 to 1974 tomorrow if that helps.


That would be great. Let me know what you find out.

Thanks

swift6
12-27-2009, 11:57 AM
The drivers door on my '72 is from a '74. Long story. The only difference is the side impact bar in the later door. Door handle, window crank etc... are all the same. Used '72 door cards on the later door with no fitting issues either.

tdskip
12-27-2009, 12:27 PM
Bob - I just measured and my findings agree with what Shawn reported.

(not that I am doubting Shawn - grin)

BobbyD
12-27-2009, 01:06 PM
Thanks guys........ I just looked at the Moss catalog and the door shell part numbers are the same for the TR250 through all of the TR6s. Based on that I "assume" the door's interior panels are the same with regard to size and clip mounting hole location. The only difference being the upholstery pattern and the interior door pull location.

Just checked the TRF Green Book and they show 3 different Door Shell part numbers :wall: