PDA

View Full Version : TR6 TR6 Top



GilsTR
12-11-2009, 09:35 PM
Can anyone on the forum tell me if the surrey top...which
I usually see on a TR4... fit on a TR6? IF it can...do you need to make any modifications to the surrey top? Thanks, Gil

M_Pied_Lourd
12-11-2009, 09:48 PM
Gil,

I can tell you that I have seen a surrey top fitted on a TR6. As far as what mods are required, I can't help you there. If you are stuck for an answer, I can find out for you.

Cheers,
M. Pied Lourd

Andrew Mace
12-11-2009, 09:58 PM
Strictly a guess, but I would say no modifications would be needed other than whatever mount points might need to be fitted, including possibly changing the header rail finisher? Hopefully someone will know better; might even be a question for the TR Register Forum (if it hasn't already been addressed there):

TR Register Forum (https://www.tr-register.co.uk/forums/)

John_Mc
12-11-2009, 11:20 PM
Wasn't there a Lee Janssen on here from Colorado who, in addition to building his own turbocharging system, fit a surrey top to his TR6? So I know it can be done. Shawn Loseke knows him so if he doesn't chime in soon, you might send him a PM and ask him about Lee.

crj7driver
12-11-2009, 11:49 PM
Here are the links to Lee's site. Really nice guy, he lives pretty close to me, so I have seen it in person several times.


https://turbo-tr6.info/


https://turbo-tr6.info/tr6_body_surrey.htm

GilsTR
12-12-2009, 09:55 AM
Very good feedback! Just the link we were looking for!
Once again...the power of the forum is as Tony-The-Tiger says
G R E A T ! ! ! Gil

AL6
12-12-2009, 02:28 PM
The only modification is that you need a to use a tr4 windscreen frame top cover plate. Roadster factory has all the the mounting hardware and seals including the tr4 top plate-------other than the top plate it should mount just like on a tr4