PDA

View Full Version : GT6 1970 GT6 seat kits and foam



jollyroger
10-06-2009, 07:32 PM
Any ideas as to a source for seat kits for my 70 gt6?
Cheers
Jolly

dklawson
10-06-2009, 07:58 PM
I'd start by contacting Nigel at Spitbits to see if he has them or if he can get them. After that, I'd check out the Newton Commercial web site in the U.K. Newton makes a lot of upholstery items for many British cars.

Gliderman8
10-06-2009, 09:11 PM
Aldridge Trimming in the UK has the seats listed on their website.... https://www.aldridge.co.uk/

Rob_T
10-06-2009, 09:35 PM
You might try Rimmer Bros. Often there prices are competitive even with shipping.
Or, a bit closer to home https://www.heritagetrim.com/index.htm. (https://www.heritagetrim.com/index.htm)

Cheers,
Rob

UmmYeahOk
10-06-2009, 10:15 PM
Ya know, its a little odd, but a few hours ago I was confused as to why there was a steering wheel right in the middle of the walkway. I looked at where it normally was kept and my seats were gone!!! Then I realized... ...Krimas!!! My husband sent them to an upholstery shop. Probably costs as much if not less than an upholstery kit and foam. Just thought it was cool, and wanted to share, since I saw that the title was "GT6 seat kits and foam"

Andrew Mace
10-07-2009, 08:44 AM
At quick glance, I don't see anything on either the Aldridge or Heritage sites that clearly indicates they have anything for the US-spec. GT6. On these cars, the US-spec. 1970 GT6 seat is a one-year-only seat; 1969 was similar but with a fixed seatback; 1971 seat style was a bit different again! Newton Commercial does seem to show specific kits, although last time I looked, the "correct" perforated vinyl was available only in black. :frown: Wherever you go, just be sure that what you're getting is specific to a US model 1970 GT6!

Mark Jones
10-07-2009, 01:20 PM
Heritage doesn't touch the Spitifre/GT6.

71MKIV
10-07-2009, 02:35 PM
I don't care where you go,

it's $$$$$$ + 10%

guzzul
10-08-2009, 05:09 PM
You might try Park Lane in the UK. Owen is very good to deal with and his shipping rates from the UK are reasonable.

https://www.parklaneclassics.co.uk/Triumph_GT6_Mk3_home_page.htm

Also Canley Classics may have what you want. I got my seat covers from them and was pleased with both the quality and cost (even after shipping).

https://www.canleyclassics.com/catalog.asp?category=200208032141573385780837

As per Andy Mace's note I would call to make sure you are getting something for your particular model.

Andrew Mace
10-08-2009, 06:04 PM
Good point about Canley's (or probably even Rimmers), as chances are they're resellers of the Newton Commercial products. Sometimes those vendors sell for less than it costs to "buy direct"!