PDA

View Full Version : Tony Barnhill



Camshaft
09-03-2009, 11:49 AM
Hey guys, do any of you have Tony Barnhill's phone number? I can't find it on his site anymore and I need to give him a call. Send me a PM if you've got it.

Basil
09-03-2009, 01:49 PM
Just spoke with Tony - He'll PM you when he gets home from the salvage yard.

DNK
09-03-2009, 01:53 PM
I'd call him more of a conservat...


oh, you said modera"tor"

DrEntropy
09-03-2009, 01:56 PM
Only you, Don. Only you.

Go to your room. :jester:

DNK
09-03-2009, 02:00 PM
Hey, I'm bored .Waiting for a torque # for my trans mount on the Wedge

DrEntropy
09-03-2009, 02:03 PM
Torque it to just short of shear.

HTH

:devilgrin:

Mickey Richaud
09-03-2009, 02:04 PM
Hey, I'm bored .Waiting for a torque # for my trans mount on the Wedge

If you haven't received it by the time I head home, I'll check my shop manual for you.

Mickey

tony barnhill
09-03-2009, 02:19 PM
Hey guys, do any of you have Tony Barnhill's phone number? I can't find it on his site anymore and I need to give him a call. Send me a PM if you've got it.
Wha's up camshaft....just PM me if you want....& my web site is still https://www.theautoist.com.

Basil
09-03-2009, 02:31 PM
Hey guys, do any of you have Tony Barnhill's phone number? I can't find it on his site anymore and I need to give him a call. Send me a PM if you've got it.
Wha's up camshaft....just PM me if you want....& my web site is still https://www.theautoist.com.

I think he was saying he couldn't find your phone number on your site, not that he couldn't find your site :smile:

DNK
09-03-2009, 03:00 PM
BTW, thanks Doc
What am I suppose to do with a stripped out al. tranny hole? :devilgrin:

SilentUnicorn
09-03-2009, 05:02 PM
BTW, thanks Doc
What am I suppose to do with a stripped out al. tranny hole? :devilgrin:

JB Weld?

swift6
09-03-2009, 05:37 PM
Hey, I'm bored .Waiting for a torque # for my trans mount on the Wedge

21 lbft, if your using a 3/8 ratchet & socket, snug it up. :wink:

DNK
09-03-2009, 06:06 PM
Beans told me 80 NMs,hmmm,
21 vs 59. They're close.

DrEntropy
09-03-2009, 06:20 PM
BTW, thanks Doc
What am I suppose to do with a stripped out al. tranny hole? :devilgrin:


Heli-Coil?


...just a thought. :wink:

Basil
09-03-2009, 06:24 PM
BTW, thanks Doc
What am I suppose to do with a stripped out al. tranny hole? :devilgrin:

Oh behave!

DrEntropy
09-03-2009, 06:47 PM
I'm glad YOU post'd that, Boss...

I wuz consternated over it. :jester:

DNK
09-03-2009, 07:36 PM
Sorry Boss, I'll go to my corner now.








Doc started it!

DrEntropy
09-03-2009, 08:03 PM
BAD Don...

Like THAT matter'd. :smirk:

Keep yer bannt'r up, Boyo!


I'm gonna go eat some FISH now. :jester:

swift6
09-04-2009, 08:43 AM
Beans told me 80 NMs,hmmm,
21 vs 59. They're close.

From the wedge list I see you are talking about the big center bolt. The 21lb ft is listed in the ROM for the "Mounting Bracket Upper/Lower Fixing". :crazy:

DNK
09-04-2009, 07:34 PM
OK , Here's the skinny on the bolt.
You can find it in the TR7 manual <span style="font-weight: bold"><span style="font-style: italic"><span style="text-decoration: underline"><span style="font-size: 12pt">ONLY</span></span></span></span>
Inthe Engine section of the torque values. Scheeze :crazyeyes:

"Rear Engine Mount To Bracket 12mm Set Screw 80Nm

Thanks Bean for pointing my nose in the right direction