PDA

View Full Version : Crankshaft bearings



mallard
07-22-2009, 08:06 PM
I've heard pros and cons about both the Bi and Tri metal bearings for the mains and rods. What is everybody here using on there rebuilds? TR3 engine. Also are all the Dimensions and Tolerancas for the TR3 TR4 engine the same except for the pistons and liners?

DougF
07-22-2009, 08:21 PM
I used tri-metal on my TR6 and will use them on the 3.

TR3driver
07-23-2009, 05:07 PM
I've got some tri-metal ones squirreled away that I'll be using. But the bimetal are good enough, IMO, I'd use them if they were the only thing available (which is sometimes true).

Brosky
07-23-2009, 06:40 PM
I went with King tri-metal bearings from BPNW and the machine shop that did my engine said they were great quality.

mallard
07-23-2009, 08:06 PM
Thanks guys, I used the tri metal in my TR6 and all is good. I just wanted to make sure. I also will order mine from BPMW.