PDA

View Full Version : TR4/4A TR4A Fuel and Brake Line Routing and Dual Exhaust



CinneaghTR
07-15-2009, 08:13 AM
I am getting ready to fix the exhaust system problem that I mentioned in a previous post (thanks guys) and feel I need to make sure the fuel and brake lines are in the right places. At the moment, they run to the center of the frame where the exhaust will go. It looks like it will be a tight and hot fit, especially for the fuel line.

Does anyone have pictures of the correct fuel and brake line routes? Moss lists clips and grommets for the fuel line so I am thinking it runs through the frame at some point.

Thanks in advance,
Jeremy

DNK
07-15-2009, 12:48 PM
This is for the 6 ,maybe similar?

https://i123.photobucket.com/albums/o316/donkelly23/BrakeLineLocation.jpg

CinneaghTR
07-15-2009, 12:56 PM
Thanks, DNK.

I found a restoration blog for a 4A and the routing looks about the same from the pictures. Maybe both lines are right beside the exhaust pipe in the center of the frame after all?

DNK
07-15-2009, 01:07 PM
We're headin to VB in Aug. How bout doing us a favor and bump up the temps by then?

CinneaghTR
07-15-2009, 06:18 PM
While I am at it, is the fuel line 1/4" or 5/16?

PeterK
07-15-2009, 07:18 PM
5/16 to the pump and then 1/4 to the carbs.

CinneaghTR
07-16-2009, 10:24 AM
Thanks, that is a big help!