PDA

View Full Version : SU Mix Adjust Memory Refresh



karls59tr
06-16-2009, 06:35 PM
Turning the jet nut UP or clockwise will lean the mixture. Is this correct. Pardon my dyslexia.

DrEntropy
06-16-2009, 07:00 PM
Yup. From the underside a clockwise turn is leaning the mix (by raising the jet).

TR3driver
06-16-2009, 11:11 PM
:iagree:
Afterwards, I always push up on the jet a little, just to be sure it's still in contact with the nut.

karls59tr
06-17-2009, 05:47 AM
Come to think of it I've heard that mentioned before but forgot to push up on the jet.....what could happen if you neglected to do that?

karls59tr
06-17-2009, 05:47 AM
Thanks for the info. :-)

DrEntropy
06-17-2009, 06:23 AM
Come to think of it I've heard that mentioned before but forgot to push up on the jet.....what could happen if you neglected to do that?

Sometimes the jet can be "grandfather'd in" by gunk. Pushing it up just insures the spring has had enough oompf to overcome any stuck condition.

TR3driver
06-17-2009, 08:23 AM
Otherwise, you turn the nut a flat or two, which isn't enough, then you go another flat or two, still not enough, then some more ... by the time I realize that the jet isn't moving I've forgotten where I started.

DrEntropy
06-17-2009, 08:27 AM
:lol: