PDA

View Full Version : su carbs



rjc157
03-04-2008, 06:47 AM
just got a pair of hs6 carbs but am alittle confused on how to set up the linkage and the fuel lines on the top of the carbs there are a number of fuel outlets anyone have any pics it would help alot and also how to set up the choke cables

NutmegCT
03-04-2008, 06:54 AM
might be helpful to know what car/engine you have ...

Tom

rjc157
03-04-2008, 07:05 AM
sorry its for a 76 tr6

NutmegCT
03-04-2008, 07:50 AM
ok - thanks. Other guys here may post specific pictures, but this will get you started in hooking things up:

https://www.teglerizer.com/sucarbs/techtip6.htm

What have you found doing a Search here?

Tom

rjc157
03-04-2008, 08:45 AM
good tech stuff but i need real pics to see whats going on the carbs that i got have the float bowls and the linkage connections on the inside facing eachother

Tinster
03-04-2008, 09:10 AM
rjc-

I'm a know nuthin' 'bout carbs just like you.

Here's some decent carb photos from some new guy that
joined up with us. Looks to me like he might know a thing
or two.

If this doesn't help ya, I'm sure some folks would take a few specific photos for you.

Regards from ten thumbs Tinster.
PS: Don't forget to powdercoat the tops to match your car!

:thumbsup:


https://tr6.danielsonfamily.org/Carb%20Rebuild%202006.htm

rjc157
03-04-2008, 09:14 AM
yes but no pics of su's

Tinster
03-04-2008, 09:31 AM
Jeff Palya is one of the best carb gurus-
Plus he's a really good guy.



https://paltech1.com/_wsn/page3.html

d

Twosheds
03-04-2008, 10:24 AM
Here's a TR6 with SUs I saw at VTR 2004. I din't know anyhing about putting SUs on a TR6.

poolboy
03-04-2008, 10:25 AM
NO pics here, but I have been considering the conversion myself.
This is what "I think I know". The fuel comes into the float chamber with 2 nipples. Enters one nipple then splits off and exits via the other nipple to the 2nd carb's float chamber.
You MAY also have 2 vacuum ports with similar size nipples that are for the valve cover ventillation hose connection. These are on the carb body proper.

eejay56
03-04-2008, 10:59 AM
They are Spits but Spitfire and GT6 magazine Photo Pages (https://www.triumphspitfire.com/enginephotos.html) has several pics of dual SU setups. Go to the "slightly modified" section. Rimmer Bros. probably has the stock linkage setup for dual SU's