PDA

View Full Version : Wiper installation question, and relays.



Simon TR4a
08-04-2006, 07:58 AM
I didn't take pictures when I took the mechanism apart, and the various diagrammes don't give enough detail!

I have the wiper motor installed, and the first piece of tubing over the cable towards the first gearbox. Remaining I have a piece of tube about 12 inches long with a slight curve one end, and a short straight piece, about 4 inches long.

It would seem the long piece goes between the two gearboxes, but which end does the curve go, and where does the short bit go, possibly on the end past the passenger side wiper ?

Second question: is an overdrive relay the same as a horn relay? If not, how dfo you tell one from the other?

Thanks for the help. Simon.