View Full Version : TR2/3/3A TR3 Front Rotors/Hubs

04-30-2006, 11:03 AM
Hi folks -- Quick question -- I removed my TR3 hubs and rotors, and have removed the four bolts connecting the two together, but they still seem very attached to each other. Yes they are rusty, and I have soaked them both in PB Blaster. Is there anything else holding the rotor and hub together beyond the 4 bolts and healthy layer of surface rust? Thanks for your help!

04-30-2006, 12:17 PM
I just took mine off last week. That's the rust holding them together after you take out the bolts in the back. It took mine a little persuasion with a brass hammer. The PB blaster should loosen up the rust, but it's a close fit, so you'll have to knock it around with the hammer a bit to get it off. /ubbthreads/images/graemlins/cheers.gif