PDA

View Full Version : TR6 TR6 Weber 40 DCOE Latest friday 4-21



hondo402000
04-21-2006, 08:26 PM
Thanks for all the help, and Alan. I finally figured out to only change one thing at a time and now I am geting close to getting things right, Switched out the 30 chokes with 28 and she is running lots better. NO flat spot off idle at all but she flutters if I get on it hard. Its not perfect yet but getting closer. I drove around a little tonight and pulled the plugs, very white so I know its running lean so I think I need to richen up the main circuit. here is the latest settings
choke 28
aux 4.5
main jet 120 probably will try a 130 next
air corr 160
Idle jet 50F11 ordered a 50F9 a little richer
acc pump 40, will try a 45
pump ex 50

ALLAN
04-21-2006, 11:47 PM
The two changes should do it, it would put you almost right on with the stock specs that Alan gave you. You didnt mention the emulsion tube number, the recomended number for that was f2. Im sure it is going to run great.

hondo402000
04-22-2006, 05:48 AM
the emulsion tube that is in now if F11 but I have F2,s I will try them and see how it changes