View Full Version : TR6 Door adjustment

05-26-2018, 12:58 AM
I am currently working on both doors-what a pain. The one adjustment I can't seem to figure out is at the striker area. The door sticks out and I can't figure out how to bring the door in closer to the body. There seems to be no adjustment on the door itself. I tried moving in the striker plate in, but it still will not bring it in close enough. Seems to be a lot of play when the door is closed and I pull on it. Any tips on what I am missing here? Any advice is welcomed.

05-26-2018, 01:34 AM
Make sure it is getting to the second level catch. You may need to move the striker plate out instead of in.

05-26-2018, 03:08 AM
You might try to adjust the metal flange that the door seal is on. Bending it a little inward might give the door a little more travel, and also might allow the striker a little more latitude.