PDA

View Full Version : Wanted 3.4 Cylinder Head



tim66ah
10-06-2016, 11:21 PM
Looking for a good used Jaguar 3.4 cylinder head for my 1967 mk2. This car has the KJ prefix head. It has a tach generator. I would consider any 3.4 head. My original head has internal corrosion that is not repairable.

Thanks,
Tim

number6
11-05-2016, 07:21 AM
Try terry's jaguar parts.

tim66ah
01-14-2017, 11:11 PM
Thanks. I used a 4.2 head. The 4.2s have different cylinder spacing, but the combustion chambers are the same as the 3.4. Two extra water holes at the aft end of the head need to be plugged. I tapped holes and installed pipe plugs. I then used straight port intake and two 2 inch SUs.

hichamaziz
02-21-2018, 07:38 AM
i wish you find it