Gunson's products always sound too good to be true. I used to have a Colortune that I couldn't effectively use, but their are those that swear by it. I loved using a borrowed Ezi-bleed!!!

Enter the Clickadjust. For a mere $50, it promises hassle free and very fast valve adjustment. I have seen several say it is great, and a couple say its a waste of money.

I'll add a poll, but I really would like to see comments as I have to do adjust the valves on the Healey in the next week or so.

What are your opinions?

Here is a description http://www.mgcars.org.uk/MG_Elec-Tech/Clikadjust_2.html

Hi,

Did not cast a vote as I have one and have neutral feelings about using it. In my case, I tried it and somewhat liked it however over time I've drifted back to the old way. In fact, I'd even forgotten I own the thing until I read your message above. That said, I can see where it has potential, but it's not for me.

Tim

I'm intrigued by the Clickadjust, but I don't know anybody with one. I had a bad experience with the EZ-Bleed, however: Nobody told me that I had to deflate my spare!

For a one time valve adjustment in a year or more, save your money. If you are going into it on a full time basis it will save your hands a few nicks and a bit of time. Wayne

I have one that I got from a friend of mine at a local show & shine for $20. Seems like it might work ok but I haven't had to adjust my tappets yet but plan on trying it during my next tune-up.

another site

http://mgaguru.com/mgtech/tools/ts080.htm

Richeous... Barney Gaylord is the man. Consistently good advice from a person that tells you how to do something and then ( Get This ) ...Tells you why! This is where my father screwed up. Every time he failed to mention why not to do it some other way ...something usually broke.

Gee, Dave, it seems as though I learned a lot the same way!
Jeff

Yea... I buy all parts in lots of 3. That way I can break 1, install 1 & have one as a spare. I can't imagine using a part that hasn't been properly tested, structurally.