• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Should I let work fit a hands free kit?

Darkheart

Freshman Member
Offline
At our company opt either to have a company car or take the cash, as company car's are taxed at a truly stupid level in the UK (it would cost me £250 a month in tax just for the perk of being able to use the car that my company would provide me with for free), I went for the cash and drive me own car.

OK so now the new phone legislation is through and my company being a responsible employer as well as fitting car kits in all company cars has offered to fit them into all employee's cars that have company phones.

The only problem is that the kits, being the fully intergrated kind that play through your stereo and interrupt it require drilling holes into the dashboard to fit. Now while I welcome not having to pull of the road whenever the mobile phone rings I'm not mad keen on having a bunch of holes in my dashboard when I come to trading in or selling the car or leaving the car kit in there (what if the new purchaser or garage doesn't use a compatible type of phone?).

Obviously those people with company cars don't care what or how the resale value of their cars is effected by the car kit and so have had them fitted. It would definatly be useful to have the kit but is there a way to offset the damage to the car?

Myself I think maybe by the time I come to selling the car, these kind of kits will be so common and probably fitted as standard in many cars so having it already fitted will be an asset.

Or

It could easily knock a grand or so off the price of the car and I should attempt to force work to find a less invasive kit (although all decent ones seem to require this kind of fitting).

Do you think I should go ahead and have it fitted or not?

Thanks,

Darkheart
 

Geo Hahn

Yoda
Country flag
Offline
You don't say what the car is but since you're asking the question I will assume it is nice enough that it would be a car I would not want to drill extra holes in.

It is usually fairly easy to install non-original accessories (speakers, alarms, kill switches, CD players) without irreversable modification... just requires a bit of creativity and perhaps an auxillary panel or bracket.

Hands free is a safety (and possible legal) issue -- but hopefully one that can be met with a non-invasive approach.
 

BEEJAY7

Jedi Warrior
Offline
Hi Darkheart.
If you get your Company to install a Bury Kit there are NO holes to be drilled. The cradles are fitted with "smart bracket" which are model dependant.
Cradles are available for most UK issue phones.
I don't know what network your Company uses but certainly Vodafone Corporate offer this kit as an option.
My Company has about 600 of these units currently installed.
Regards

Alan
 
Similar threads
Thread starter Title Forum Replies Date
mctriumph TR2/3/3A Safety mods every Tr3 should get Triumph 12
K TR2/3/3A RE: Pulling the choke knob all the way out....the carb jets should be down how far? Triumph 5
AUSMHLY 2nd gear should I file it? Do gears have a hard coating? Austin Healey 7
S TR6 Should I Buy This "73 Triumph TR6" Triumph 3
T TR2/3/3A Should there be a body ground strap to battery on TR3 Triumph 7
BN6_2197 How regular should I change the gearbox oil? Austin Healey 5
AngliaGT Why You Should Double - Check Your Parts When You Receive them. Spridgets 2
Got_All_4 TR6 Should I paint the inside of the block? Triumph 17
S Well, this should be interesting..... Other Cars 9
KVH TR4/4A Should I Cut the Lower Windshield Gasket Triumph 2
C MGB Should I lubricate the cog gears MG 2
55modified Should I remove driver's side fender to work on footbox on my BN1? Austin Healey 14
George Zeck What fuel gauge SHOULD I have? Spridgets 3
B How often should you change the rear rear axle oil Austin Healey 9
B TR6 Should the poly diff mounts be snug to the studs? Triumph 2
Sopwith_Camel 95 xj r cheap should i run away screaming? Jaguar 2
abarth69 Should I remove this section Spridgets 8
L Should I do it?? [electrical conversion] Austin Healey 24
B TR2/3/3A what adjustment should i select with Koni shocks onTR3? Triumph 4
T TR4/4A Should I use ARP Assembly Lubricant for Engine Assembly and Fastener Installation? Triumph 2
F Exhaust gas analyser - what carbon monoxide level should I expect from my BT7? Austin Healey 7
K TR2/3/3A How long should an SU damper top up last? Triumph 22
M TR2/3/3A What oils, lubes etc should I have at my house at all times? Triumph 39
Got_All_4 TR2/3/3A What color should these parts be? Triumph 4
Joe Reed MGB Wiring problem....this should be fun :[ MG 4
stretchit2 Portable Hardtop Rack - Should it stay or should it go Austin Healey 28
M TR6 Should I buy a TR6? Triumph 24
Keoke Everone should own one Austin Healey 14
W TR2/3/3A '56 TR3 St 15000+ should have disc brakes... Right? Triumph 33
K TR2/3/3A How much oil should the steering box have in it? Triumph 6
Wirewheels General Tech Do we really care what our LBC's speedometer reads? Should we? MG 7
S TR6 Worth Saving??? What do you think we should do? Triumph 30
GTP1960 TR2/3/3A Should you paint your leaf springs? Triumph 5
2billydavies TR2/3/3A what bolts should i use to mount engine on an engine stand? Triumph 13
V General TR should or shouldn't? Triumph 19
R TR4/4A Replacing Door and Window Handles _ Should Be Simple - But Its Not Triumph 4
R TR4/4A About to put in an OD Transmission. What else should I do while in the air Triumph 7
T TR2/3/3A Should I put flat washers on sump bolts? Triumph 3
E How much should i pay for a complete 100/4 engine ? Austin Healey 4
luke44 General TR Every TR Owner should really appreciate this picture. Any guesses? Triumph 7
M TR4/4A Where should TR4A carpet snaps be placed? Triumph 10
J TR4/4A 1965 TR4 in pieces, What should we do with it? Triumph 9
Got_All_4 TR2/3/3A What color should this part be? Triumph 5
JPSmit Bring a Trailer should be banned Other British Cars 3
M How well should the water pump free spin? Spridgets 4
C What should the VIN plate look like for a BN1? Austin Healey 1
N Spitfire Should this be bent? Triumph 4
PatGalvin TR2/3/3A what color should it be...? Triumph 7
C Inner Sill Assembly Should i spend extra money on kilmartin brand??? Austin Healey 4
60TR3A Should My '63 BJ7's Carburetors Have Brass Caps or Black Plastic? Austin Healey 3

Similar threads

Top