• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

TR4/4A CG measurements

Rut

Obi Wan
Country flag
Offline
Does anyone have the CG points for a TR4a tub? I’m working on the mounts for my rotisserie and need to change them from MGB to TR.
Thanks, Rut
 

ed_h

Jedi Hopeful
Country flag
Offline
Rut--

Cant be too different from a TR6. Not sure what kind of rotisserie you are using, but on this one with a platform, CG line is just above the lower air intakes at the front and right at the horizontal edge below the license plate area at the rear. Without the platform it would of course be higher.

Ed

IMG_0835a.JPG
 

HAWAIICJ

Senior Member
Country flag
Offline
Ed that is a very nice rotisserie!

Looks like a custom creation more than re-purposed engine stands.
 

tinman58

Jedi Knight
Silver
Country flag
Offline
Very Nice!
 
OP
Rut

Rut

Obi Wan
Country flag
Offline
Ed,
Thanks for the picture and explanation. Like yours, mine is a set of 2 engine stands and I plan on mounting using the front and rear frame mounts. Mine does not have the adjustment yours does, so I need to look into building that.
Thanks, Rut
 
Similar threads
Thread starter Title Forum Replies Date
BoyRacer Door Panel Measurements Austin Healey 3
M TR6 Assistance required with measurements please. Triumph 4
M TR6 Assistance required with some measurements. Triumph 9
BOBBYR Body Panel measurements and angles Austin Healey 6
RAC68 Top Frame platform location measurements Austin Healey 0
1 MGB '66 MGB radio measurements MG 3
rvm Annulus shaft thread measurements? Austin Healey 12
E TR6 measurements of a Snugtop hardtop for 250/6 Triumph 2
M TR4/4A Front sway bar measurements required. Triumph 0
R TR4/4A body measurements Triumph 0
BOBBYR Frame Measurements Austin Healey 12
JFeher TR2/3/3A Rebuilding A type OD I Need advise / measurements Triumph 14
RJS TR4/4A TR4A Stock Ride Height - my measurements Triumph 0
T TR2/3/3A Requesting some body measurements. Triumph 10
Rut Bugeye measurements Spridgets 5
C TR2/3/3A 59' TR3A Body measurements Triumph 4
sundown TR6 TR6 Body measurements Triumph 4
S MK1 midget measurements Spridgets 0
Brosky Wedge TR8 Seat attaching bolt measurements Triumph 13
P Bonnet measurements? Spridgets 9
T Options & measurements for front floor repair Spridgets 5
BOBBYR BJ8 frame measurements Austin Healey 4
boeingpilot I need an education on wheel measurements... Triumph 8
Lin Engine/gearbox measurements Austin Healey 0
Gundy Steering wheel measurements needed Spridgets 6
T Frame Measurements BN-1 Austin Healey 3
B Measurements of HS6 Carb MG 12
HealeyPassion Dyno measurements .. RWHP and RWTQ Austin Healey 55
boeingpilot GT6 GT6 Crank Journal Measurements Triumph 4
I Wedge Wheel measurements for a TR7 or TR8 Triumph 2
R TR2/3/3A I need some TR3 measurements Triumph 13
J Brake Servo mounting measurements Austin Healey 3
F GT6 Happy Ending - Missing GT6 Frame Measurements Triumph 0
F GT6 Call for help...missing GT6 frame measurements! Triumph 16
Morris Cam lobe RE-measurements Spridgets 1
Morris Cam lobe measurements Spridgets 12
jaybird I need measurements MG 17
Lin BJ8 intake manifold measurements Austin Healey 3
W Rear Suspension Measurements MG 7

Similar threads

Top