Guy Marshall
Member
Offline
Hi all,
Reinstalling a rebuilt BN6 side change gearbox I discovered the PO had replaced the slave cylindar mounting bolts with 20mm M10 metric bolts which have now stripped out.
There seems to be plenty of space to re-tap with longer (1½"?) 3/8" unf bolts but has anyone had any experience/recommendations?
Reinstalling a rebuilt BN6 side change gearbox I discovered the PO had replaced the slave cylindar mounting bolts with 20mm M10 metric bolts which have now stripped out.
There seems to be plenty of space to re-tap with longer (1½"?) 3/8" unf bolts but has anyone had any experience/recommendations?