STeve 1958
Jedi Hopeful
Offline
I replaced my vacuum advance and while I was at it I check the Mechanical advance a little closer. The weights and springs are all there but there is a lot of slop which allows the weight to move without spring tension. Is this normal or should the springs be tight to begin with?
I also cleaned the carb. with some Gum Out and then had to completely re-tune the carb. as everything changed. I guess it needed it.
I'm ready to go for a drive.
Steve
I also cleaned the carb. with some Gum Out and then had to completely re-tune the carb. as everything changed. I guess it needed it.
I'm ready to go for a drive.
Steve