• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

2=3 Shift

Country flag
Offline
It should be sprung over that way. I'm going from memory... I use the datsun gearboxes.
 

nomad

Yoda
Offline
I've experienced the same, Rick, in my BE. Wasn't a problem till I shortened the shift lever. Now I have to keep it in mind while driving that car that that happen's and give it a good hard push to the right when I go to third.
 

SaxMan

Darth Vader
Country flag
Offline
I've had the same issue. I'm glad to hear that I'm not alone. I figured that I just have to be mindful of my shifting.
 

Gerard

Luke Skywalker
Country flag
Offline
:highly_amused::highly_amused::highly_amused:

 
OP
HealeyRick

HealeyRick

Yoda
Silver
Country flag
Offline
Ouch, Gerard :smile: I suspect part of the problem is swapping cars between the bugeye and the nasty boy. While the bugeye has a stock ribcase, the nasty boy has an aftermarket Steeda shifter with a strong spring towards the 3-4 gate.

IMG_0180.JPG


Am I right thinking the peg #145 below is responsible for locating the shifter in the 3-4 gate?

SPM-025A.jpg


Maybe a spring added to the end of the peg would kick the shifter over a bit?
 
Last edited:

Gerard

Luke Skywalker
Country flag
Offline
Sorry Rick. This is a persistent joke between my kids and me... I hear it a lot, so I couldn't resist... LOL ...:banana::cheers:

Nice shifter kit!

Ouch, Gerard :smile: I suspect part of the problem is swapping cars between the bugeye and the nasty boy. While the bugeye has a stock ribcase, the nasty boy has an aftermarket Steeda shifter with a strong spring towards the 3-4 gate.

View attachment 55411

Am I right thinking the peg #145 below is responsible for locating the shifter in the 3-4 gate?

View attachment 55412

Maybe a spring added to the end of the peg would kick the shifter over a bit?
 

Joe Schlosser

Jedi Warrior
Silver
Country flag
Offline
I believe that the pin Moss #145 is to align the lever. It fits into the slot on the shift lever.
There are no springs in the trans except for the Parts (#108/9/10) that keeps tension on the shift lever.
If everything is tight the lever does sort of sit in the 3/4 position but I don't see anything positive to hold it.
In one of my trans I frequently touched 1st if not paying attention when going to 3rd. However, in my present box I do not have the issue. Not sure why
 

Gerard

Luke Skywalker
Country flag
Offline
I believe what contributes to the problem is how well the various detents work. Springs that have lost their tension and if the notches have developed a ramp instead of being crisp, especially in the 1st/2nd synchrohub will contribute to overtravel and catching the gear.
 
Similar threads
Thread starter Title Forum Replies Date
S Gear Shift Lever Travel Austin Healey 13
CARSINC For Sale Sprite Shift Lever Spridgets Classified 0
AHS Side-Shift Gearbox Austin Healey 3
bighealeysource Side-Shift Transmission Austin Healey 13
R RIB CASE SHIFT LEVER Spridgets 0
R Wanted BUGEYE SHIFT LEVER Spridgets Classified 6
K TR2/3/3A Gear shift pops out of 2nd gear sometimes? Triumph 5
S MGB 78 MGB cannot shift into reverse MG 3
TR3MT TR2/3/3A Hot Gear Shift Lever Triumph 12
AngliaGT For Sale MGB /Midget Wooden Shift Knob MG Classifieds 0
S TR2/3/3A Gear shift knob Triumph 8
WHT Center-Shift Bellhousing Austin Healey 10
DrEntropy Shift rod seal in an automatic? Jaguar 7
R 59 Bugeye rib cage tranny hard shift into reverse Spridgets 0
K TR2/3/3A Anyone remember the "rattling gear shift" fix? Triumph 8
KVH General Tech Gear Shift Sticks Triumph 6
S CHROME RING, shift lever grommet ....? Austin Healey 3
T Ribcase Shift Lever Installation -Bushing Spridgets 1
C For Sale Brown Ebony Shift Knob Other British Classifieds 0
TomMull TR2/3/3A shift knob Triumph 19
J BN2 Shift Lever Bushing Replacement Austin Healey 6
J TR2/3/3A such strange thread on gear shift knob Triumph 12
D 62 center shift gearbox Austin Healey 11
AUSMHLY Wooden shift knob, how to refinish Austin Healey 35
RAC68 First Gear Shift Difficuties Austin Healey 3
D 1962 center shift gearbox cover Austin Healey 7
C TR2/3/3A Rotating shift lever Triumph 12
Rob Glasgow Wanted Austin Healey Gear Shift Lever Austin Healey Classifieds 2
F Austin Side shift transmission question Austin Healey 0
KVH General Tech Grinding Gears in Shift From 1st to 2nd Triumph 13
C TR6 Shift lever Triumph 4
J BN2 shift bushing replacement Austin Healey 5
U Shift knob reference? Restoration & Tools 11
S 1962 BT7 transmission shift rail bumber in bell housing Austin Healey 1
G BJ-7 Center Shift Gear Lever and bush Austin Healey 4
Michael Oritt Shift lever issue [No Healey content] Austin Healey 0
S TR4/4A Fascia support and shift rod boot Triumph 0
Michael Oritt Gear shift lever modifiacation [No Healey Content] Austin Healey 7
wangdango BJ8 gear shift consol restoration... Austin Healey 9
Gerard Datsun 5 speed Quick shift/short shift prototype Spridgets 41
Zitch TR4/4A Who said the TR4 round shift knobs were NLA Triumph 4
Jim_Gruber Shift Points for Bugsys 948 w Cooper S Head Spridgets 3
tinman58 TR5/TR250 Funny sounds from gear shift Triumph 4
Rut 5 speed gear shift lever Spridgets 28
Rut MGB MGB OD gear shift lever MG 0
P Sprite Shift Lever Spridgets 20
T MGB My '80 B used to shift fine MG 2
jfarris TR2/3/3A Reverse shift rod stuck Triumph 7
6 Gear Shift Lever Spridgets 3
T TR2/3/3A Rubber gear shift boot tearing Triumph 14

Similar threads

Top