Got_All_4
Luke Skywalker
Offline
This head is off my 69 TR6 and is going to the machine shop Wednesday for a valve job and what else. I measured the head tonight and it's 3.462" so should be near 8.75:1 compression. Do the numbers cast into the head have any particular meaning? Also on the side of the block there is a 90 written in red on the left side. Don't know the significance of that ether.
I think I want to shave a bit off the head to increase HP a little. Don't want to go radical as I want to keep it more reliable and just a bit more kick in the pants. Going to send the cam and lifters into Delta Camshaft for inspection, repairs and maybe a light regrind too.
I think I want to shave a bit off the head to increase HP a little. Don't want to go radical as I want to keep it more reliable and just a bit more kick in the pants. Going to send the cam and lifters into Delta Camshaft for inspection, repairs and maybe a light regrind too.