Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Folks,
I had the front nose off my TR3A and I am having problems getting the turn signal wiring reconnected properly. Matching up the color coded wires does not seem to work.
The wiring harness was replaced a few years ago.
From the steering column, I have the following wires for turn signals:
Green with Brown stripe
Green with White strip
Green with Red strip
From the left front turn signal, I have:
Red
Green with White stripe
From the main wiring harness, I have the empty connectors.
Green with Red stripe
Green with Brown stripe.
Red
Green with Red stripe and Green with White stripe (double connector)
Any suggestions would be greatly appreciated.
Thanks.
I had the front nose off my TR3A and I am having problems getting the turn signal wiring reconnected properly. Matching up the color coded wires does not seem to work.
The wiring harness was replaced a few years ago.
From the steering column, I have the following wires for turn signals:
Green with Brown stripe
Green with White strip
Green with Red strip
From the left front turn signal, I have:
Red
Green with White stripe
From the main wiring harness, I have the empty connectors.
Green with Red stripe
Green with Brown stripe.
Red
Green with Red stripe and Green with White stripe (double connector)
Any suggestions would be greatly appreciated.
Thanks.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.