I am replacing the upper Wishbone ball joints on my 1954 TR-2. I have replaced the ball joints and I am replacing the four bolts on the top bar. The two outer bolts went in fine, and tighten up.The two inners now just spin around, apparently not setup like the outers with a fixed nut. I looked up through the spring and could not see where the bolts were sticking out, to get a nut on them?
What do I have to do to be able to tighten these two inner bolts?
Dick Vinal
What do I have to do to be able to tighten these two inner bolts?
Dick Vinal