• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Fixings for liner assembly hood comparment -BJ7

grimes6

Senior Member
Country flag
Offline
Hi all,
I am just about to upholster the rear liner assembly compartment on my BJ7 . This consists of a metal section fixed to a plywood panel. Can anyone tell me how the plywood is fixed to the metal panel - rivets ? Photos attached of item in question


attachment.php



Regards,
Greg
 

Attachments

  • bj7_shutplate.jpg
    bj7_shutplate.jpg
    25.1 KB · Views: 168

vette

Darth Vader
Country flag
Offline
Greg, my memory isn't too good but looking at this pic makes me think they are rivets.
 

Attachments

  • DSCF2708.jpg
    DSCF2708.jpg
    63.6 KB · Views: 112

Griz

Jedi Hopeful
Offline
Greg, may I ask where you found these trim panels? I don't remember seeing them in the Moss catalog.

Griz
 

vette

Darth Vader
Country flag
Offline
If someone wanted to make a pair, I'm pretty sure these dimensions would get you there.
 

Attachments

  • Copy of img242.jpg
    Copy of img242.jpg
    44.2 KB · Views: 88

bob hughes

Luke Skywalker
Country flag
Offline
Are we talking about the rear quarter internal panels here?

I bought rear quarter panels from AH Spares and they came as a one piece unit, screwed at the front into the B post and again at the rear into the projecting bracket.

:cheers:

Bob
 
Similar threads
Thread starter Title Forum Replies Date
F How to restore screws, springs and fixings on SU HD6 Carburetors? Austin Healey 7
alanjohnturner TR4/4A Surrey Top fixings Triumph 3
Gatheringtree TR2/3/3A Changing out the battery liner Triumph 11
KVH General Tech ARP Head Studs/Liner Protrusion Triumph 10
Rob Glasgow Boot Liner Edge Finish Austin Healey 11
S Boot Liner - BJ8 Austin Healey 19
L TR2/3/3A Liner spigot fit? Triumph 13
aero3113 100-4 trunk liner kit Austin Healey 4
S TR2/3/3A Wet liner issues Triumph 6
TEM666666 Sprite MK1 Door liner rubber mat installation.. Need tips and recommendations. Spridgets 22
Rob Glasgow Armacord Trunk Liner Austin Healey 8
maxwedge5281 bn6 armacord trunk liner kit Austin Healey 4
AHS TR4/4A Looking for piston & liner recommendation Triumph 17
W TR2/3/3A Piston and Liner Triumph 2
T General Tech How loose can a piston liner be? Triumph 2
S Scuttle Liner/ Footwell Cards Austin Healey 10
Gray_Cat Bed Liner As Undercoating Spridgets 2
Tinkerman TR2/3/3A TR 3A Battery Box Liner. Drain Holes? Triumph 3
Tinkerman TR2/3/3A Battery Box Liner TR3A Tip for the Day Triumph 5
K Figure of 8 Gaskets for Wet Liner Engine? Triumph 5
M 87mm piston n liner Triumph 1
TomMull Piston and liner kits with steel FO8 gaskets Triumph 9
TomMull piston and liner kits Triumph 11
PatGalvin TR2/3/3A TR3 Cylinder Liner Install Question Triumph 6
B TR2/3/3A Dynamat liner. Will it spoil a 57 tr3 restoration? Triumph 20
H Liner Gaskets Triumph 13
CinneaghTR TR4/4A TR4 Plastic Battery Box Liner? Triumph 4
J Question on piston/liner sets Triumph 2
M Rhino liner type paint Spridgets 21
P Liner Removal Help Triumph 7
TR4nut Wet Liner Engines & Valve Interference Triumph 18
J Trunk Liner Installation Austin Healey 2
chicken How is the scuttle top liner held down Austin Healey 14
M Mahle piston and liner kit ?? Triumph 11
KVH TR4/4A Piston Liner Protrusion TR4 Triumph 19
N Spitfire Do Spitfire Hardtops have a liner? Triumph 4
TexasSprite Door liner idea for Bugeye Spridgets 5
B TR2/3/3A TR3 piston/liner advice Triumph 5
Number_6 TR2/3/3A 89 mm Piston and Liner Kit for TR3 Triumph 5
N Fender Liner's Triumph 2
N Hardtop liner question. Triumph 1
W Ribbed BE door liner Spridgets 5
YankeeTR I need ONE 83 mm cylinder liner... Triumph 6
Shinsen774 Old Hood Liner Adhesive Removal MG 7
tr6web Hard top liner installation Triumph 1
L TR4/4A Looking for a TR3-4a 87mm piston & Liner Triumph 0
tahoe healey boot liner/spare support Austin Healey 8
ChrisS Max. bore w/ liner Spridgets 3
tahoe healey boot liner Austin Healey 6
R6MGS MGB MGB Battery Box liner MG 3

Similar threads

Top