I am in the process of replacing the front wheel bearings on a 1959 AH 3000.
I am retaining the distance piece and appropriate shims.
I have been told that there is an acceptable end float for the front wheel bearings, but I cannot find it in the BMC shop manual.
Does anyone where this information is documented, or what the allowable end float should be?
Thanks.
Ron
I am retaining the distance piece and appropriate shims.
I have been told that there is an acceptable end float for the front wheel bearings, but I cannot find it in the BMC shop manual.
Does anyone where this information is documented, or what the allowable end float should be?
Thanks.
Ron