Curious about these carbs. I have been trying to hook up a new vacuum advance copper tube from the dist to the port on the carb. But I am running into an issue. The tube is too short.
The port for my car is on the front carb (behind the primary fuel feed line in the picture). After encountering this, I have studied other 7’s and they all have ports on the rear carb. Also, the fuel line set ups look slightly different than on other cars.
Anyone run into this? Are these replacement carbs? They are in very good condition and the car runs good, but I have been using a flexible hose for the advance (which I don’t like).
Any background or suggestions are really appreciated.
Thank you.
The port for my car is on the front carb (behind the primary fuel feed line in the picture). After encountering this, I have studied other 7’s and they all have ports on the rear carb. Also, the fuel line set ups look slightly different than on other cars.
Anyone run into this? Are these replacement carbs? They are in very good condition and the car runs good, but I have been using a flexible hose for the advance (which I don’t like).
Any background or suggestions are really appreciated.
Thank you.