Well I have been burning out my eyeballs out trying to find a picture and instruction on how to operate the choke. The stuff I have learned over the years is to twist the knob to the right, pull the choke knob out then twist back to the left and release the choke; let it catch on one of the groves in the choke mechanism. When the motor has warmed up some, turn to the choke knob to the right again and then push the choke in and turn to the left until the choke catches on the next grove; let the engine warm up some more turn the choke to right and push in and then turn back to the left until the choke stops on the next grove or is fully returned with a warm engine and with the words CHOKE facing up.
There seems to be 2 catches on the chokes I have used before I run out of pulled cable and the engine is warm and the choke has returned.
I looked in Bentley and the practical hints, but could find anything.
In addition, to this I was looking for those little brass clips the choke cable anchors down with under the dash by the glove box.
Has anyone found any information on choke operation from the factory !!!!
steve
There seems to be 2 catches on the chokes I have used before I run out of pulled cable and the engine is warm and the choke has returned.
I looked in Bentley and the practical hints, but could find anything.
In addition, to this I was looking for those little brass clips the choke cable anchors down with under the dash by the glove box.
Has anyone found any information on choke operation from the factory !!!!
steve