Results 1 to 3 of 3

Thread: Disassemble Speedo Adapter

  1. #1
    Yoda
    Join Date
    Feb 2007
    Location
    California USA
    Posts
    3,071
    Chats
    0

    Disassemble Speedo Adapter

    I have my speedo adapter out on the bench and figured it would be a good time to replace the O-ring and seal; however, the seal is buried inside the adapter and it too big to be replaced in the usual fashion. It appears the adapter is a 2-piece unit, with a smaller part--with the threads for the angle drive--inside the 'barrel.' It should come apart, but for a small pin that holds the parts together (see attached photo). Anybody know how to separate the two; hopefully, so they can be rejoined?

    SpeedoDrive.JPG

  2. #2
    Yoda Randy Forbes's Avatar
    Join Date
    Feb 2003
    Location
    SW Florida (Sarasota/Bradenton area)
    Posts
    4,223
    Chats
    0

    Re: Disassemble Speedo Adapter

    I had to make some tools to fit the flats, but it comes apart pretty easily (these pieces are coated with a dry-film lubricant, hence the color).





    Piece of cake
    http://www.britishcarforum.com/bcf/image.php
    57 Healey BN6L-942 Wine Red/Honey Tan
    99 BMW M Rdstr Cosmos Black Eurosport Twinscrew Supercharger
    01 BMW M Rdstr Steel Gray Performance Center (factory) Delivery
    11 X5 35i Sport Deep Sea Blue Metallic Wife's Turbo Hauler

  3. #3
    Jedi Warrior
    Join Date
    Nov 2011
    Location
    Martinsville NJ
    Posts
    421
    Chats
    0

    Re: Disassemble Speedo Adapter

    Pin offered no resistance when I took one apart as per Randy's photos.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •