Results 1 to 7 of 7

Thread: I tried to post this earlier and it didn't seem to work so this might soon appear as

Classifieds for members to buy/sell Austin Healey Cars/ Parts

  1. #1
    Member
    Join Date
    Mar 2013
    Location
    Pittsburg,New Hampshire
    Posts
    25
    Blog Entries
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    I tried to post this earlier and it didn't seem to work so this might soon appear as

    HI all,
    Merry Christmas,

    My engine rebuilder finally called with a list of stuff he needs [ sure !! 2 weeks before christmas !!!]

    I have what i believe is a mid 1970's 1275 and he said i need 4 new pistons 30 over with rings etc.
    i need a weber downdraft setup and i ned a new cam .. i also need 2 seats complete but in any condition as they will be recoverd no matter how nice they are ..so i'd rather have complete set of seats and pay only for poor condition since i am gonna recover them in burgundy leather.
    i need a dash board with all gauges .I also need front and rear bumpers.. cluth and pressure plate as long as we are going this far ..thanks in advance .. please give me a little wiggle room to respond ..thanks to everyone .
    from the great far north [ of New Hampshire,8 miles from the Quebec border !!]

  2. #2
    Member
    Join Date
    Mar 2013
    Location
    Pittsburg,New Hampshire
    Posts
    25
    Blog Entries
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Re: I tried to post this earlier and it didn't seem to work so this might soon appear

    UPDATE !!

    I have found and bought the following items i was looking for :
    2 seats
    a dash board
    front and rear bumpers

    so I will cross these items off my wanted list
    thanks but keep your thinking caps on as i still need a carb set up ,,,new pistons etc,,,new cam ,moderate

  3. #3
    Member
    Join Date
    Mar 2013
    Location
    Pittsburg,New Hampshire
    Posts
    25
    Blog Entries
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Re: I tried to post this earlier and it didn't seem to work so this might soon appear

    bump

  4. #4
    Member
    Join Date
    Mar 2013
    Location
    Pittsburg,New Hampshire
    Posts
    25
    Blog Entries
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Re: I tried to post this earlier and it didn't seem to work so this might soon appear

    hi,
    I AM RESTORING MY 1960 BUG EYE AND THE COMPANY WHO IS REBUILDING MY MOTOR TELLS ME THE NUMBERS ON THE BLOCK READ ::: 12v167iZiL8952 " THIS IS A 1275 THAT i AM SIMPLY QUESSING IS FROM SOMETIME IN THE 1970'S BUT JUST A GUESS.I WONDER IF ANY OF YOU GUYS HAVE THE INFO TO LOOK IT UP FOR ME AND TELL ME EXACTLY WHAT I AM WORKING WITH AS I NEED 4 NEW PISTONS , A NEW CAM AND A NICE WEBER DOWNDRAFT FOR THIS PUPPY ..YOUR HELP IS GREATLY APPRECIATED
    MIKE

    MIKEMENH73@YAHOO.COM

  5. #5
    Luke Skywalker
    Join Date
    Mar 2002
    Location
    Sacramento
    Posts
    1,753
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Re: I tried to post this earlier and it didn't seem to work so this might soon appear

    https://www.minimania.com/Engine___I...n_Data_UPDATED
    go here to get information on your engine. Lots of them produced and this website has the answers.

    Jerry

  6. #6
    Jedi Knight Bob Claffie's Avatar
    Join Date
    Feb 2003
    Location
    Dalton Mass
    Posts
    892
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Re: I tried to post this earlier and it didn't seem to work so this might soon appear

    Why a new cam ? Is the old one worn out or ??? Replacing a cam is grossly overrated for a street driven car. "Hot" cams don't necessarily make horsepower/torque they only move it around and change the useful power band. Likewise in a general way Weber carbs are also overrated and the performance gain ? is usually offset by the difficulty/expense of having them tuned.

    You may build an engine that will happily rev to 8000 rpm but have difficulty moving off from a stop light. Needless to say I am very skeptical of modified street engines. Been there, done that and learned my lessons the hard way.
    Thank goodness the MG is finally gone, replaced by another Corvette

  7. #7
    Member
    Join Date
    Mar 2013
    Location
    Pittsburg,New Hampshire
    Posts
    25
    Blog Entries
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Re: I tried to post this earlier and it didn't seem to work so this might soon appear

    i am having my engine rebuilt by competition motors in portsmouth,nh...my go to guy told me he needed a new cam and 4 new pistons for my 1275 /30 overand I need a new carb so why not get a weber ,,i only need one so what the heck this guy really knows his stuff so I am not gonna argue with him .. thank you for your thoughts

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •