Results 1 to 2 of 2

Thread: 1962 BT7 transmission shift rail bumber in bell housing

  1. #1
    Freshman Member
    Join Date
    Nov 2017
    Location
    Las Vegas, NV
    Posts
    3
    Chats
    0

    Cool 1962 BT7 transmission shift rail bumber in bell housing

    Hi all! I am a new member, restoring a [or trying to] 62 BT7.
    As I peel back the layers that have been left for me, I discover many issues of improper reassembly from previous mechanics. And I use that term loosely. This car was just rescued from it's 27 year storage unit home.
    I will cut to the chase; Question[s]. Transmission shift rail rubber bumper belonging inside bell housing. Does anyone know how thick roughly this should be. Since there are none apparently available, and mine is missing. And shift rails have left marks as they have tried to drill through! Obviously been left out of reassembly last time. I can cut one from something, just need thickness approximation. Thanks in advance to any and all who answer.
    Scott in Vegas!

  2. #2
    Jedi Warrior
    Join Date
    Nov 2011
    Location
    Martinsville NJ
    Posts
    421
    Chats
    0

    Re: 1962 BT7 transmission shift rail bumber in bell housing

    I had an original in good condition that measured 3/32" in thickness. I made a few from some gasket material from McMaster-Carr.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •