Has anyone used these (Moss part numbers (021-155/021-154)? I just installed these and, after several attempts at bleeding the system, the brake pedal still goes half way to the floor before it gets firm. I am wondering if there is a mismatch between my master cylinder and the new calipers.
Everything was working properly before I started this process but I could see that the rubber seals on the old calipers were starting to deteriorate.
thanks,
Peter Schauss
1963 BJ7
Everything was working properly before I started this process but I could see that the rubber seals on the old calipers were starting to deteriorate.
thanks,
Peter Schauss
1963 BJ7