Results 1 to 10 of 10

Thread: Clutch and oil line Pictures requested

  1. #1

    Clutch and oil line Pictures requested

    The car is coming along. Currently the engine bay and underside is painted and the body is back on the frame. I was planning on painting the entire car body before placing the body on the frame but the Air Force decided it was time to move so my restoration plans changed a bit.

    I need some photos of the oil pressure line from the filter housing to the firewall and the clutch line from the master to the slave. Thanks

    Derek

  2. #2
    Yoda CJD's Avatar
    Join Date
    Feb 2011
    Location
    Southlake, TX, USA
    Posts
    4,314
    Chats
    0

    Re: Clutch and oil line Pictures requested

    Remind me which year?
    John

    1955 TR2

  3. #3

    Re: Clutch and oil line Pictures requested

    1960, post 60k

  4. #4
    Yoda CJD's Avatar
    Join Date
    Feb 2011
    Location
    Southlake, TX, USA
    Posts
    4,314
    Chats
    0

    Re: Clutch and oil line Pictures requested

    Hopefully these will get you started:











    John

    1955 TR2

  5. #5
    Jedi Knight
    Join Date
    Apr 2013
    Location
    redding,ca
    Posts
    818
    Chats
    0

    Re: Clutch and oil line Pictures requested

    Derek,
    The oil pressure line runs from the front bolt on the oil filter housing then fairly level to below the fuel pump . Then bends up with a clip around the line that is bolted to the rear stud on the fuel pump. The pictures show the upper location of this line. Which includes the first solid line with the "ring" located at the filter housing, then the flexible line and the solid line into the firewall and to the gauge.
    Sorry no pictures but hope this helps.
    Charley

  6. #6

    Re: Clutch and oil line Pictures requested

    Thanks for the pictures and information. Does the clutch line have any other clips besides the one at the heater firewall connector?

  7. #7
    Jedi Knight
    Join Date
    Apr 2013
    Location
    redding,ca
    Posts
    818
    Chats
    0

    Re: Clutch and oil line Pictures requested

    No other clips it then ends at the joint further down that is a body tub tab. This is where it joins the flexible line into the slave cylinder.
    Charley

  8. #8
    Obi Wan
    Join Date
    Nov 2004
    Location
    washington state
    Posts
    2,416
    Chats
    0

    Re: Clutch and oil line Pictures requested

    There is a ring or eyelet on the frame

  9. #9

    Re: Clutch and oil line Pictures requested

    Perfect, I figured that was the case but wanted to verify. Thanks again

  10. #10
    Yoda CJD's Avatar
    Join Date
    Feb 2011
    Location
    Southlake, TX, USA
    Posts
    4,314
    Chats
    0

    Re: Clutch and oil line Pictures requested

    This would be the lowest clip:

    John

    1955 TR2

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •