Results 1 to 3 of 3

Thread: Help on cable routes

  1. #1
    Jedi Hopeful
    Join Date
    Mar 2014
    Location
    callicoon center NY
    Posts
    189
    Chats
    0

    Help on cable routes

    I have 3 holes in the firewall and three cables to go through them. Choke, heater control and hood release.
    In the picture "A" is above the heater hoses, "B" is to the right of the harness and "C" is hiding there below the rear carb.
    Which cable goes in which hole
    Al Shoop
    Attached Images Attached Images
    65 TR4A #CT55092

  2. #2
    Jedi Hopeful
    Join Date
    Mar 2015
    Location
    Dublin, CA
    Posts
    192
    Chats
    0

    Re: Help on cable routes

    I know B is hood release and A is heater control. So C must be choke. And that location makes sense.
    Gary
    1962 (Nov Build) Triumph TR4 CT/16836L Restoration in process

  3. #3
    Jedi Hopeful
    Join Date
    Mar 2014
    Location
    callicoon center NY
    Posts
    189
    Chats
    0

    Re: Help on cable routes

    The problem is that the choke cable is retained in a hole feeding from the top of the rear carb. Note the locations on the modified picture. The choke cable is no way long enough to wind around the linkage and the carb to descend from the top. This is my dilemma
    Figured it out I hope. "A" is the choke since it has to be above the carb. "B" is hood release and "C" lines up with the heater control.
    Next question: where does the horn and OD relays mount?
    Attached Images Attached Images
    Last edited by shoopal; 08-12-2017 at 03:44 PM.
    65 TR4A #CT55092

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •