Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hey Guys
Im at the point where i need to bite the bullet and decide whether or not to rebuild this diff. I have used white lithium grease to get an idea of where the pinion is contacting the C/W and the result is as pictured below. From what ive read its a little to high on the face of the C/W so the pinion needs to be closer to the C/W. Im a bit concerned at the pattern on the pinion but cannot find any info as to what it should look like. So im asking rebuild or leave it alone ?
Cam
Im at the point where i need to bite the bullet and decide whether or not to rebuild this diff. I have used white lithium grease to get an idea of where the pinion is contacting the C/W and the result is as pictured below. From what ive read its a little to high on the face of the C/W so the pinion needs to be closer to the C/W. Im a bit concerned at the pattern on the pinion but cannot find any info as to what it should look like. So im asking rebuild or leave it alone ?
Cam
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.