Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
When I pull down the trip meter knob and attempt to turn it I get a slight movement of the four digits moving altogether and then it jams. Can the back of the speedo be taken off and the mechanism freed up and lightly lubricated? I don't want to risk taking everything apart. Thought there might be a simple fix?
-
The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
-
Hey there Guest!
If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.**Upgrade Now**
(PS: Subscribers don't see this UGLY banner)
TR2/3/3A Odometer trip meter?
- Thread starter karls59tr
- Start date
Share this page
charleyf
Luke Skywalker
Offline
The unit comes part from the front not the back. Take the chrome ring and glass off the front. And you will need to remove the extension part of the trip meter to get the unit to drop out the front. You should be able to see the gears inside and hopefully what is causing the problem. But there is not much lubication in there that I have seen.
c
Charley
c
Charley
CJD
Yoda
Offline
The trip odo is a series of number wheels with friction discs between them. As the grease dries out, movement tends to jam...much as you are describing. You could try using a degreaser on the wheels after you get to them by opening the case...but the number tapes could easily be discolored if you are not careful. It would be best to dis-assemble the wheels to clean and re-lube them, but that is a rather large job.
If you don't want to tackle it, Nisonger or others will rebuild and calibrate the speedo...at a rather stiff price.
Check out post #66 for an idea of what you're up against:
https://www.britishcarforum.com/bcf/showthread.php?94885-Instrument-Faces/page2
If you don't want to tackle it, Nisonger or others will rebuild and calibrate the speedo...at a rather stiff price.
Check out post #66 for an idea of what you're up against:
https://www.britishcarforum.com/bcf/showthread.php?94885-Instrument-Faces/page2
Similar threads
Similar threads
-
-
-
-
-
TR2/3/3A Speedometer Bounce with Odometer Gear Movement - Benchtop Calibration
- Started by Joel M
- Replies: 3
-
-
TR2/3/3A Dismantling Speedometer...getting the odometer pin past the case???
- Started by karls59tr
- Replies: 2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.