• les m

    Hi Have a 65 TR4A IRS and am going to replace the diff seals and gasket. All are leaking. also while I am there will drop out the swing arms and re bush them as well as replace the wheel bearings and collapsable spacer. I assume its easier to do this on the shed floor rather than in the car. I hope its a case of jacking the chassis up and blocking it then dropping the diff out then same with swing arms. Has anyone done similar or know any problems I might find. any info would be appreciated.
  • Recent Articles

  • Recent Forum Posts


    Re: J-H no longer needs a push!

    Yeah, has to be it. Take the tops off, pour a couple of quarts down the carb, enough to coat the exhaust system to make it smoke.
    Probably easier

    TOC Today, 02:56 PM Go to last post

    Re: Hello

    Welcome to the fun, Murry! Great to hear you're bringing a great little British car back to life rather than seeing it go to the salvage yard!

    Basil Today, 02:44 PM Go to last post

    Re: no leaks, but the generator is not charging

    You had over 2 volts without the field connected, right?
    So, either your connection is causing a short to ground (possibly missing insulation where

    TR3driver Today, 02:32 PM Go to last post

    Re: polish the jet

    Worth a try. I've gotten away with it before.

    TR3driver Today, 02:25 PM Go to last post

    Re: Jerrie Cobb

    You would not believe what a Colombian Termite Mound can do to an aircraft.
    Ripped the nose gear right off the bulkhead. Two big pieces of lumber

    TOC Today, 02:22 PM Go to last post
  • Recent Blog Posts

    Bernard 94

    Triumph Roadster 2000


    Bernard 94 04-08-2019 05:35 AM
    Bernard 94

    Triumph Roadster 2000


    Bernard 94 04-08-2019 05:26 AM
  • Twitter