PDA

View Full Version : For Sale 1275 Tranny Rebuild Parts



Vengar
10-24-2016, 06:50 PM
Gentlemen! It's getting right chipper outside, and that can only mean one thing......time to take it in, take it apart, and get started on that winter project of rebuilding your tranny! What? You don't want to spend all that money because collecting all those parts is expensive? You don't say.....well here's the deal you've been looking for. Seeing as I sold my '72 Sprite race car, and the guy who bought it was somewhat of a richard, I still have in my possession a box-o-parts that can be yours. Collected over some time, here's what you get:
-some parts are moss, mostly victoria though and some good used. I have included part numbers and stampings where applicable. Everything new unless noted-
1. Moss gasket set (x1) BGK 106 297-700 + various gaskets (see pic)
2. .004 shim 2-2595 (x4)
3. Ball 12-1419 (x6)
4. Layshaft 2-2704 (x1) U.K.
5. Needle cage bearing 2-2011 (x2)
6. Spring 2-7289 (x3)
7. Synchro ring 2-2904 (x1 new U.K.)(x2 used)
8. Needle cage bearing 2-2009 (x1)
9. Bearing 1st motion shaft 2-2010 (x1) U.K.
10. Bearing 3rd motion shaft 2-2013 (x1) used, good shape U.K.
11. Rear oil seal 2-2253 (x1) U.K.
12. Needle rollers 2-2010 (x52)
13. Clutch fork 2-2856 (x1)
14. Fork boot 9-1018 (x1) used serviceable
15. Release bearing cup (x1) used
16. Reverse gear 2-2817 (x1) used serviceable
17. 2nd gear 2-2815 (x1) used good shape
18. Laygear 22G83 (x1) used good shape
19. Syncro hub assembly 3rd & 4th 22G95 (x1) used good shape NLA
20. Bag of various rib case bits and some thrust washers

I'm not even going to tell you how much all this cost me, but you can figure it out. "My loss is your gain". Asking $400
Pull your old box apart and feel good about yourself next spring. Will ship to contiguous 48. Others inquire first please.
45468

Vengar
11-26-2016, 11:37 AM
black friday bump. asking $350

Vengar
09-16-2017, 05:54 PM
Same story......... different year. Still have this kit. Will accept $350.

Vengar
10-09-2017, 07:49 PM
bump

Joe Schlosser
10-12-2017, 10:22 AM
This looks like a spridget Trans you are posting in the wrong section

Vengar
10-15-2017, 07:26 AM
Thanks Joe.

Vengar
11-27-2017, 11:49 AM
Black Friday bump. $300 takes it!

atlaajetmech
08-07-2018, 04:04 PM
Did you ever sell these parts?

Vengar
08-07-2018, 05:29 PM
Still available....

Pat
01-27-2019, 10:01 PM
Hello, parts still available?

atlaajetmech
01-28-2019, 08:57 PM
Well I wasn’t the member who had the parts but I will be tearing down a late rib case in about a month to part it out.